SR

Kaliburn SR plasma cutting system

The powerful way to cut cost as well as metal

The Kaliburn SR range is ideal for light-duty fabrication, ducting, insulation and HVAC work. The Kaliburn SR is a powerful way to cut through it all. Even if you are new to plasma cutting, you are going to find it is straightforward and easy to learn.

You get a narrower kerf, less dross, more cuts; and the range operates at 100% duty cycle, which means no time is lost between plasma cuts.

Four power-supply modes gives you the opportunity to cut a range of thicknesses and materials, with equal ease.

The power supply and plasma torch can run continuously without shutting down or overheating. There is an extreme cost saving on replacement parts and plasma consumables. Kaliburn’s patented electrodes last up to 4 hours, that’s twice as long as any other! The plasma power supply is designed for easy installation and maintenance.

The Kaliburn SR plasma cutters provide the reliability, precision, and performance you can expect from Kaliburn. The system is both economical to operate and inexpensive to purchase; and has the longest warranty in the industry.

diagspirit


Choose Your Kaliburn SR consumable

SR 100i
Item Number Description Order Part Number
1 Outer Retaining Cap – I.H.S. Systems Only 810120
2 50 amp Shield Cap (use with nozzles 810132 & 810134) 810130
2 100 amp Shield Cap (use with nozzle 810131) 810129
2 100 amp Shield Cap (use with nozzle 800062) 800063
3 30-50-75-100 amp Retaining Cap 800071
4 50 amp Nozzle (5 per pack) 810132
4 75 amp Nozzle (5 per pack) 810134
4 100 amp (tapered) Nozzle (5 per pack) 800062
4 100 amp Nozzle (5 per pack) 810131
5 30-50-75-100 amp Swirl Ring 800053
6 Advancable Electrode (3 per pack) 800275
7 Torch Main Body without I.H.S. Systems 800280
7 Torch Main Body with I.H.S. Systems 810226
SR 45i
Item Number Description Order Part Number
1 Retaining Cap 770098
1 Retaining Cap- Thin gauge stainless steel 770180
2 Nozzle -Metal Cutting 1/8″ to 3/8″ material (5 per pack) 770000
2 Nozzle – Tapered metal cutting 26 to 10 gal material (5 per pack) 770104
2 Nozzle – Insulation cutting (5 per pack) 770030
2 Nozzle – Thin gauge stainless steel 770195
3 Swirl Ring 770012
3 Swirl Ring – Thin gauge stainless steel 770185
4 Electrode – Advanceable (use 3 to 4 times each) (5 per pack) 770015
4 Electrode – Non Advanceable (use 1 time) (5 per pack) 770017
4 Electrode – Non Advanceable thin gauge stainless steel (5 per pack) 770190
5 O-Ring 770072
6 Torch Main Body 770073

Please contact us for a competitive quote consumables@kerfdevelopments.com

Leave a Reply

Your email address will not be published. Required fields are marked *