Kaliburn Proline plasma cutting system
- Three Proline systems, each offers precision high current density plasma cutting that combines square, and virtually dross-free cuts with excellent speeds.
- Available in different amperages with corresponding thickness capacity.
- Full function, with manual control, you can tailor all of the cutting parameters to your specifications. Optional patented INOVA Torch Height Control System can be built into the ProLine 2260, greatly simplifying installation.
Offers expanded thickness capability and optimized cutting speeds, and is the highest amperage in the ProLine family.
275 amp system can cuts most metals up to 1 ¼’’ (32.0mm) thick, and has a maximum capacity of 2 ½’’ (65.0mm).
Uncompromising precision cut quality, combined with excellent processing speed and low initial investment, equates to the lowest possible cost to produce quality finished parts.
Whether you need precise, clean, virtually dross-free edges on thinner metals or you need the same high quality when cutting 1 inch steel at 65 inches per minute, the ProLine 2260 can deliver. If your goals include maximum productivity on a wide range of thicknesses, combined with optimum cut quality, economical operation, and modest initial cost, the ProLine 2260 by Kaliburn is the plasma cutting system for you.
If you are facing a high quality, heavy-duty job without a heavy-duty budget, the ProLine 2200 is your answer. The system offers all of the benefits of precision, high current density plasma at a fraction of the cost of other systems.
200 amp system capable of production cutting gauge thicknesses through 1 ¼’’ (32.0mm) thick with a maximum capacity of 2’’ (50.0mm).
If you are looking for precision, high current density plasma process technology at a price comparable to conventional plasma, the decision to purchase a ProLine 2200 plasma system from Kaliburn is truly a ‘no-brainer’!
150 amp on gauge thick metals to 1’’ (25.0mm), with a maximum capacity to 1 ½’’ (38.0mm).
Uncompromising cut quality at the lowest initial investment, equates to the best value in precision high current density plasma.
Kaliburn Spirit series
Kaliburn also offers four fully automated machines in the “Spirit” family; the Spirit150a, Spirit200a, Spirit275a, and Spirit400a plasma cutting machines. These machines are our most advanced systems and provide cut quality identical to the ProLine systems. With Spirit systems, all process parameters are set automatically for ease of operation.