SR

Kaliburn SR plasma cutting system

The powerful way to cut cost as well as metal

The Kaliburn SR range is ideal for light-duty fabrication, ducting, insulation and HVAC work. Kaliburn SR is a powerful way to cut through it all. Even if you are new to plasma cutting, you are going to find it is straightforward and easy to learn.
You get a narrower kerf, less dross, more cuts; and the range operates at 100% duty cycle, which means no time is lost between plasma cuts.

Four power-supply modes give you the range to cut a range of thicknesses and materials, with equal ease.

The power supply and plasma torch can run continuously without shutting down or overheating. There is an extreme cost savings on replacement parts and plasma consumables. Kaliburn’s patented electrode last up to 4 hours, that’s twice as long as any other! The plasma power supply is designed for easy installation and maintenance.

The Kaliburn SR plasma cutters provide the reliability, precision, and performance you can expect from Kaliburn. The system is both economical to operate and inexpensive to purchase; and has the longest warranty in the industry.


Kaliburn SR 100i
Kaliburn SR 100i

When Oxy-fuel just won’t cut it, step up to plasma cutting with the Kaliburn SR-100i. This the right unit to tackle light-duty fabrication, ½’’ or less and ductwork.

A true, constant current output gives you a smoother cut and squarer edge – at full load there’s only 1% current ripple.

The Kaliburn SR-100i models are economical plasma cutting systems with the reliability, precision and performance you’ve come to expect from Kaliburn. You not only spend less time, you spend less money on consumables and replacement parts. So, if you’re looking for a powerful way to cut cost as well as metal, then check out the Kaliburn.

See Kaliburn SR consumables

Kaliburn SR 45i
Kaliburn SR 45i

The SR-45i plasma cutter brings you proven durability and performance.

This 45 amp air plasma cutting system is the machine of choice for cutting sheet metal and HVAC insulation to shape. The SR-45i makes a smoother cut with a squarer edge, with a true and constant current output -at full load there’s a maximum of only 1.5% current ripple. It operates in four power supply modes, to cut anything from 1/2″ mild steel to HVAC insulation.

See Kaliburn SR consumables